LOGGING INTO THE 192.168.1.254!
Want to use your ADSL router without the use of wire, well then 192.168.1.254 is the IP address that can help you. This IP address will make it possible for you.
Want to connect your different devices with the router? Well, you can use ADSL Router and then share it as it is a few minutes process of setting it up. Now with the help of this now you can share your files, hard drives, and printers with the help of your Wifi within its range. You can also go for the wired Ethernet connectivity via the help of the one of the port at the back of the router. It has a built-in ADSL modem, via a microfilter router plugs directly into your telephone.
It can be tedious for you to choose the Wifi N ADSL Router according to your requirements and to help you with that there are videos at which you can look into that will help you to make right decisions.
An ADSL router is actually both the ADSL Router and modem inclusive.
LOGGING INTO THE 192.168.1.254!
First, visit this address in your browser – http://192.168.l.254. It’s your choice if you want to type this or to copy-paste it. Next, the system will ask you to enter your username along with your password.
192.168.1.254 is something called as a private IP address, which is a block of IP address for the private networks. This means that using this private IP device within this private network can not be accessed directly from the Internet. But on the other side, you can connect any device to a local network to any of your other device that too is on that network.
While the router itself has the private IP of 192.168.1.254, it assigns any devices in its network a different, private IP address.
To avoid any IP address conflict, all IP address on a network are the same. Remember within that network only! Other common private IP addresses used by modems and routers are used in the modems, and the routers are 192.168.1.100 and 192.168.1.101
You can use the Command prompt in case you don’t know your router’s IP address:
- Press Windows-X, this will open the power user menu, and then click Command Prompt.
- Enter ipconfig this will show you all the computer’s connection list of yours.
- After this, you will find the “Default Gateway” that will be under the “Local Area Connection” section. Now you can see your router’s IP address.
Entered the Wrong Password? Let’s fix it
In any case, if you entered information which is wrong then you will not be given access. For re-entering the password, you will have to reset the system. For resetting, you need to use a needle and then press the reset button for an interval of about 10-15 seconds. This will take your device to the reset mode, and then you can re-enter the password information.
Don’t Know the Password? Let us find it
It will not be such a problem as you can get the default modem password online.
No Router Administration Interface?
In case the address mentioned above didn’t work for you then it might be possible that the router has been configured to be used with a different IP address by the manufacturers. You can also try to use a wired connection to connect your device instead of the Wifi network to make sure there aren’t any connectivity related issues.
It’s very easy to be used, and most probably you would not suffer from any sort of major problem while using it.
The router is a network device that helps to connect two computer’s network. It is one of the things without which most of us life would stop and would fall onto a speed breaker. We can’t even imagine one day without our network connection. In-home networking scenario a router connects your home computer network to the network of the internet service provider. All of our work needs to be completed on the internet nowadays.
Hopefully, this article was helpful to you and was of worth something. Most of the things have been covered within this article and have been elaborated where it needs to be!